Eta Gratus Maxipasta Bedienungsanleitung PDF herunterladen (Seite 52)

Before using attachments G2 and G3 it is necessary to fi rst process using attachment G1.

Prepare the dough for the pasta. Roll some dough and flour the attachment rollers, which

you plan to use. Insert the power cord plug A11 into a power socket. Put the appliance

into operation by turning the speed dial A2 to position 1, the attachment rollers will begin

to rotate. Repeatedly pull the dough between the rollers, until it is smooth (you can aid this

by turning the dough over by length or by width). Each time you pull the dough through

gradually set the speed dial on the side of the base to a higher speed, until you achieve the

desired thickness. The recommended thickness for pasta is when the speed dial is set from

5 to 7. Process (cut) the finished sheets using attachments G2 or G3 to the desired width

(their different blade arrangements create the given type of pasta) process as necessary.

Cook the prepared pasta within four hours.

Pasta attachment (I1 - I5)

Assembly (Fig. 6e)

Insert the conveyor screw D1 into the meat mincer D with the cogwheel first. Depending

on the type of pasta, slide the chosen attachment (plate I1 - I5) onto the carrier, so that the

slot of the plate fits into the mount of the meat mincer D. Finally, screw the nut D6 onto the

meat mincer and tighten with reasonable force.

Installation on to the multi-function head (pic. 6f, 6g)

Slide out cover A6 of the multi-function head A7. Insert the assembled meat mincer D

into the mount A4 at an angle of approximately 45

and secure in a horizontal position by

turning anticlockwise (you will hear a click). To the top part of the meat mincer D attach the

fi lling funnel D14. Now the meat mincer is ready for operation.

Use

By using interchangeable attachments with various openings, you can create various types

of pasta. Place a stainless steel bowel or a suitable tray under the meat mincer to collect

the pasta. Keep inserting the dough into the filling opening of the funnel smoothly so that

the conveyor screw can collect it, while pressing it slightly with the pusher D13.

Ingredients: per each 110 g of dough, add 1 egg (50 - 60 g), 0.5 – 1 tablespoonful of oil

and 0.5 – 1 tablespoonful of water. After heat treatment (i.e. cooking) you will get approx.

320 g of fresh pasta.

Recommendation

– Into the bowl add flour (00 – wheat smooth flour, resp. T400 – wheat selected

semi-rough flour), egg, and oil. Mix the dough using the kneading hook for 6 -10

minutes at a speed of 1 - 2. If the mixture is too dry, add very little amount of water.

Turn off the appliance and knead by hand to create a smooth dough. Leave the dough

approx. 90 minutes at rest. The best quality pasta is achieved, if before processing

you wrap the dough and allow it to rest in the refrigerator for approximately 10 hours.

– To maintain perfect integrity of the pasta, it is necessary to ensure sufficient supply of

dough into the machine.

– To produce the pasta, the speed of 1 or 2 is recommended. During high-speed

production of pasta (e.g. with attachment I1) lower the speed to optimum value.

– The processing takes several minutes and depends on the amount, type and quality

of the dough used.

– An average portion is 100 g of pasta per person. When cooking, observe the rule of

1 litre water and 10 g salt per 100 g pasta.

/ 90

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Eta Gratus Maxipasta Bedienungsanleitung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küchenmaschinen Eta Gratus Maxipasta